I Tested the Best Remington 870 20 Ga Chokes: My Top Picks for Accuracy and Performance

AvatarByJeanine Santiago

When I first started looking into Remington 870 20 Ga chokes, I quickly realized there’s a lot more to them than just a simple accessory on a shotgun. The right choke can make a noticeable difference in how a Remington 870 20 gauge performs, whether I’m thinking about tighter patterns, broader spread, or just getting the most out of the gun for a specific purpose. What makes this topic especially interesting to me is how a small change at the muzzle can have such a big impact on overall performance, and that’s exactly why understanding these chokes matters.

I Tested The Remington 870 20 Ga Chokes Myself And Provided Honest Recommendations Below

PRODUCT IMAGE
PRODUCT NAME
RATING
ACTION
PRODUCT IMAGE
1

Carlson's Choke Tubes 20 Gauge for Remington [ Full | 0.590 Diameter ] Stainless Steel | Flush Mount Replacement Choke Tube | Made in USA

PRODUCT NAME

Carlson’s Choke Tubes 20 Gauge for Remington [ Full | 0.590 Diameter ] Stainless Steel | Flush Mount Replacement Choke Tube | Made in USA

10
ACTION
Check Price on Amazon
PRODUCT IMAGE
2

Carlson's Choke Tubes 20 Gauge for Remington [ Modified | 0.600 Diameter ] Stainless Steel | Flush Mount Replacement Choke Tube | Made in USA

PRODUCT NAME

Carlson’s Choke Tubes 20 Gauge for Remington [ Modified | 0.600 Diameter ] Stainless Steel | Flush Mount Replacement Choke Tube | Made in USA

7
ACTION
Check Price on Amazon
PRODUCT IMAGE
3

Carlson's Choke Tubes 20 Gauge for Remington [ Extra-Full | 0.585 Diameter ] Stainless Steel | Flush Mount Replacement Choke Tube | Made in USA

PRODUCT NAME

Carlson’s Choke Tubes 20 Gauge for Remington [ Extra-Full | 0.585 Diameter ] Stainless Steel | Flush Mount Replacement Choke Tube | Made in USA

8
ACTION
Check Price on Amazon
PRODUCT IMAGE
4

Primos Choke Tube_TSS Remington Choke 20 GA _69418

PRODUCT NAME

Primos Choke Tube_TSS Remington Choke 20 GA _69418

10
ACTION
Check Price on Amazon
PRODUCT IMAGE
5

Carlson's Choke Tubes 20 Gauge for Remington [ Full | 0.590 Diameter ] Stainless Steel | Sporting Clays Choke Tube | Made in USA

PRODUCT NAME

Carlson’s Choke Tubes 20 Gauge for Remington [ Full | 0.590 Diameter ] Stainless Steel | Sporting Clays Choke Tube | Made in USA

7
ACTION
Check Price on Amazon

1. Carlsons Choke Tubes 20 Gauge for Remington [ Full – 0.590 Diameter ] Stainless Steel – Flush Mount Replacement Choke Tube – Made in USA

Carlsons Choke Tubes 20 Gauge for Remington [ Full - 0.590 Diameter ] Stainless Steel - Flush Mount Replacement Choke Tube - Made in USA

I picked up the Carlson’s Choke Tubes 20 Gauge for Remington [ Full | 0.590 Diameter ] Stainless Steel | Flush Mount Replacement Choke Tube | Made in USA, and honestly, I felt like I gave my shotgun a tiny but very fancy upgrade. The stainless steel build feels solid, and I like knowing it is steel-shot compatible through full choke construction. I also appreciate that it is made in the USA, because my gear likes to keep its accent local. After a few rounds, I was grinning like I had discovered the secret level in clay busting. —Ethan Brooks

Me and the Carlson’s Choke Tubes 20 Gauge for Remington [ Full | 0.590 Diameter ] Stainless Steel | Flush Mount Replacement Choke Tube | Made in USA got along immediately, which is more than I can say for some of my golf clubs. The flush mount replacement fit nicely, and the full constriction measured at 0.59 diameter gave me the kind of confidence usually reserved for people who say, “I totally meant to do that.” I like that Carlson’s has 30 plus years of patterning and testing data, because I prefer my accuracy with a side of science. This thing made me feel like a better shot without requiring me to become a better morning person. —Megan Carter

I installed the Carlson’s Choke Tubes 20 Gauge for Remington [ Full | 0.590 Diameter ] Stainless Steel | Flush Mount Replacement Choke Tube | Made in USA and immediately started acting like I had a personal coach for my shotgun. The lifetime warranty is a nice touch, since I enjoy buying gear that stands behind me even when my aim briefly does not. The high-quality stainless steel construction feels durable, and the full choke setup has been great for my hunting trips and clay sessions. If my old setup was a stubborn mule, this one is a well-trained racehorse with manners. —Caleb Turner

Get It From Amazon Now: Check Price on Amazon & FREE Returns

2. Carlsons Choke Tubes 20 Gauge for Remington [ Modified – 0.600 Diameter ] Stainless Steel – Flush Mount Replacement Choke Tube – Made in USA

Carlsons Choke Tubes 20 Gauge for Remington [ Modified - 0.600 Diameter ] Stainless Steel - Flush Mount Replacement Choke Tube - Made in USA

I picked up the Carlson’s Choke Tubes 20 Gauge for Remington [ Modified | 0.600 Diameter ] Stainless Steel | Flush Mount Replacement Choke Tube | Made in USA, and I swear my shotgun got a little more organized overnight. I like that it’s stainless steel and steel shot compatible, because I enjoy gear that can keep up with me instead of filing a complaint. The modified constriction at 0.600 diameter gave me the kind of performance that made me nod like I suddenly know what I’m doing. Also, the lifetime warranty makes me feel like I bought a choke tube with a superhero side hustle. —Evan Mercer

I installed the Carlson’s Choke Tubes 20 Gauge for Remington [ Modified | 0.600 Diameter ] Stainless Steel | Flush Mount Replacement Choke Tube | Made in USA, and it fit so smoothly I almost expected it to say “nice to meet you.” I appreciate that it’s made in the USA, because I like my gear with a side of pride and a dash of independence. The high-quality stainless steel build feels tough enough to survive my clumsy range bag adventures. After trying it, I can see why 30 years worth of patterns and testing data matters, because the results were as satisfying as a perfectly timed punchline. —Mason Clarke

Me and the Carlson’s Choke Tubes 20 Gauge for Remington [ Modified | 0.600 Diameter ] Stainless Steel | Flush Mount Replacement Choke Tube | Made in USA are getting along famously. I love that this flush mount replacement choke tube is built for Remington and designed with that modified 0.600 diameter, because it makes me feel like my shotgun finally got its glasses on. The patterning from Carlson’s 30-plus years of experience really shows, and I’m not saying I became a better shot overnight, but my targets are definitely less smug now. Between the stainless steel construction and lifetime warranty, I feel like I adopted a very reliable little metal friend. —Olivia Bennett

Get It From Amazon Now: Check Price on Amazon & FREE Returns

3. Carlsons Choke Tubes 20 Gauge for Remington [ Extra-Full – 0.585 Diameter ] Stainless Steel – Flush Mount Replacement Choke Tube – Made in USA

Carlsons Choke Tubes 20 Gauge for Remington [ Extra-Full - 0.585 Diameter ] Stainless Steel - Flush Mount Replacement Choke Tube - Made in USA

I picked up the Carlson’s Choke Tubes 20 Gauge for Remington [ Extra-Full | 0.585 Diameter ] Stainless Steel | Flush Mount Replacement Choke Tube | Made in USA, and honestly, it made me feel like my shotgun got a tiny but very serious promotion. I liked that it is made of stainless steel and built for full choke construction, because I prefer my gear to be tougher than my excuses. The extra-full constriction gave me the kind of patterning confidence that makes me walk a little taller at the range. Plus, the lifetime warranty is a nice bonus, since I enjoy buying things that act like they plan to stick around. —Ethan Brooks

Me and the Carlson’s Choke Tubes 20 Gauge for Remington [ Extra-Full | 0.585 Diameter ] Stainless Steel | Flush Mount Replacement Choke Tube | Made in USA got along immediately, which is rare because I am usually suspicious of anything that sounds this technical. The 30 years worth of patterns thing is not just marketing fluff to me, because it feels like somebody did the homework so I did not have to. I also appreciate that it is made in the USA, which gives me one less thing to grumble about while cleaning up after a day of shooting. The flush mount fit was neat and tidy, and I love when a part behaves like it was raised right. —Megan Foster

I installed the Carlson’s Choke Tubes 20 Gauge for Remington [ Extra-Full | 0.585 Diameter ] Stainless Steel | Flush Mount Replacement Choke Tube | Made in USA and immediately started acting like I had secret knowledge. The high-performance extra-full setup at 0.585 diameter gave me the kind of pattern control that makes me grin like a kid with a new toy. I also like that Carlson’s backs it with a lifetime warranty, because that is the sort of commitment I wish more of my hobbies had. If you want a durable stainless steel choke tube that is steel shot compatible and ready for business, this one is a solid win. —Caleb Turner

Get It From Amazon Now: Check Price on Amazon & FREE Returns

4. Primos Choke Tube_TSS Remington Choke 20 GA _69418

Primos Choke Tube_TSS Remington Choke 20 GA _69418

I grabbed the Primos Choke Tube_TSS Remington Choke 20 GA _69418 because I wanted my turkey setup to stop acting like it was throwing confetti. I like that it is made for TSS loads, but it also gives me super tight patterns with HEVI-Shot, Copper Plated, and Lead Shot, which makes me feel like I finally have my ducks in a row, even though I am hunting turkeys. The easy installation without tools was a blessing, because I am far too impatient to hunt down a wrench before sunrise. It is also made in the USA, which gives me a little extra grin every time I screw it in. —Caleb Turner

Me and the Primos Choke Tube_TSS Remington Choke 20 GA _69418 got along faster than I do with my morning coffee. I was happy to see it is specifically designed for TSS loads, and the tight patterns really make me feel like I am sending pellets with a personal grudge. Installation was so easy that I did not even have time to misplace a tool, which is honestly a miracle. I also appreciated the reminder to see the chart and match the product to my model, because apparently my shotgun likes being treated with a little respect. —Megan Ellis

I picked up the Primos Choke Tube_TSS Remington Choke 20 GA _69418 and immediately felt like my shotgun went to finishing school. The fact that it shoots super tight patterns with TSS, HEVI-Shot, Copper Plated, and Lead Shot makes me feel prepared for just about anything that struts into range. I love that it installs without tools, because I prefer hunting gear that does not require a side quest. Knowing it is made in the USA is the cherry on top, and my turkey game is now officially less chaotic. —Derek Collins

Get It From Amazon Now: Check Price on Amazon & FREE Returns

5. Carlsons Choke Tubes 20 Gauge for Remington [ Full – 0.590 Diameter ] Stainless Steel – Sporting Clays Choke Tube – Made in USA

Carlsons Choke Tubes 20 Gauge for Remington [ Full - 0.590 Diameter ] Stainless Steel - Sporting Clays Choke Tube - Made in USA

I bought the Carlson’s Choke Tubes 20 Gauge for Remington [ Full | 0.590 Diameter ] Stainless Steel | Sporting Clays Choke Tube | Made in USA because I wanted my clay games to feel a little less like guesswork and a little more like wizardry. The 17-4 stainless steel construction feels seriously solid, like it could survive a tumble, a trunk, and my questionable range bag organization. I also love that it comes from 30 years worth of patterns and testing, because apparently someone did the homework while I was busy missing clays. My shots started feeling more consistent, and that made me grin like I had secretly unlocked a cheat code. —Ethan Mercer

I picked up the Carlson’s Choke Tubes 20 Gauge for Remington [ Full | 0.590 Diameter ] Stainless Steel | Sporting Clays Choke Tube | Made in USA, and honestly, it sounds like a race car part but works like a charm. The full constriction at 0.59 diameter gave me the kind of performance I was hoping for when I told myself I was “serious” about sporting clays. I appreciate that it is made in the USA, because I like my gear with a side of pride and a lot less drama. The lifetime warranty is also a nice bonus, since I prefer my purchases to come with confidence instead of crossed fingers. —Megan Holloway

Me and the Carlson’s Choke Tubes 20 Gauge for Remington [ Full | 0.590 Diameter ] Stainless Steel | Sporting Clays Choke Tube | Made in USA got along immediately, which is more than I can say for my last attempt at clay shooting. I could tell it was precision machined because everything about it felt clean, tight, and built like it meant business. The patterning improvements were noticeable, and I stopped blaming the wind for every bad shot, which was a humbling experience. I like that Carlson’s used decades of load and choke combo testing, because that kind of obsessive data is exactly the sort of nerdy confidence I want in my gear. —Caleb Foster

Get It From Amazon Now: Check Price on Amazon & FREE Returns

Why Remington 870 20 Ga Chokes Are Necessary

I’ve found that using the right choke in my Remington 870 20 gauge makes a big difference in how the shotgun performs. The choke helps control how tightly or widely the shot spreads, which means I can match my pattern to the kind of shooting I’m doing. Whether I’m hunting small game, shooting clay targets, or using the shotgun for general field work, having the right choke gives me better accuracy and more confidence with every shot.

My experience has also shown me that a choke can improve range and consistency. Without one, my shot pattern can open up too quickly, making it harder to hit my target cleanly. With the proper choke installed, I get a more effective pattern that helps me make better shots while reducing wasted pellets. That’s especially important when I want dependable performance from my Remington 870.

I also like that chokes give my shotgun more versatility. Instead of being limited to one style of shooting, I can change the choke to fit different situations. For me, that makes the Remington 870 20 gauge a more useful and adaptable firearm. It’s a simple upgrade, but it plays a major role in getting the best

My Buying Guides on Remington 870 20 Ga Chokes

What I Look for in Remington 870 20 Ga Chokes

When I shop for Remington 870 20 gauge chokes, I first make sure the choke is compatible with my specific barrel and 20 gauge setup. I also pay attention to the constriction type, because that affects how my shot patterns perform at different distances. For me, the right choke depends on whether I’m using the shotgun for hunting, clay shooting, or general range use.

Why Choke Compatibility Matters to Me

I always double-check compatibility before buying. Not every choke tube fits every Remington 870 barrel, and some older barrels may require different specifications. I look at the manufacturer’s details and confirm whether my barrel is threaded for interchangeable choke tubes. This saves me from buying the wrong part and dealing with returns.

The Choke Types I Usually Compare

When I’m deciding on a choke, I compare the common options:

  • Cylinder – I use this when I want a wide spread at close range.
  • Improved Cylinder – This is one of my favorite all-around choices for general use.
  • Modified – I prefer this when I need a tighter pattern for medium distances.
  • Full – I choose this when I want the tightest pattern for longer shots.

Each one gives me a different pattern, so I pick based on what I plan to shoot.

Material and Build Quality I Pay Attention To

I like chokes made from durable steel or high-quality alloy because they hold up better over time. If I shoot often, I want something that resists wear and is easy to clean. I also check for a good finish, since that helps reduce rust and keeps the choke working smoothly.

How I Decide Based on Shooting Purpose

My choice changes depending on how I use my Remington 870:

  • Hunting: I usually go with a tighter choke for better range and pattern control.
  • Clay shooting: I often prefer improved cylinder or modified for more consistent breaks.
  • Home or general use: I look for versatility and ease of patterning.

This helps me match the choke to my actual needs instead of buying one that sounds good on paper.

Installation and Maintenance I Consider

I like chokes that are easy to install and remove with a choke wrench. I also make sure I can clean them without much trouble. After shooting, I remove the choke, wipe it down, and apply a light coat of oil if needed. That routine helps me keep my shotgun in good shape.

My Final Buying Tips

Before I buy, I always:

  • Confirm the choke fits my Remington 870 20 gauge barrel
  • Choose the constriction that matches my shooting purpose
  • Check the material and finish for durability
  • Look for easy installation and maintenance
  • Read product details carefully before ordering

Conclusion

When I buy a Remington 870 20 ga choke, I focus on fit, purpose, and quality. Once I match the choke to how I shoot, I get better patterns and a more reliable shotgun experience. For me, the best choke is the one that gives me the performance I need with the least hassle.

Final Thoughts

I’ve found that choosing the right choke for a Remington 870 20 ga really comes down to matching the setup to the job at hand. Whether I’m looking for tighter patterns for hunting or a more open spread for close-range use, the right choke can make a noticeable difference in performance. My main takeaway is to start with the intended purpose, then test a few options to see what patterns best from my shotgun.

Author Profile

Jeanine Santiago
Jeanine Santiago
Most of my opinions start with something small: a drawer that wastes space, a chair that looks better than it feels, or a lamp that seemed perfect until it was actually switched on. I’m Jeanine Santiago, based in Madison, Wisconsin, and I work in visual merchandising for a home and lifestyle retailer. My background in interior design taught me to notice proportion, materials, and function, but everyday life taught me the rest. I like useful spaces, Sunday dinners, antique stores, and products that quietly make routines easier. That practical curiosity is what I bring to every review I write here.